1, how to solve the problem of graphics over the world

(1) The software zero position must be consistent with the actual machine installation origin limit switch, the upper right corner must be set in the upper right corner, not free to change.

(2) If it is not a machine with automatic feeding, it is not a double-headed asynchronous machine. In the additional function parameter setting interface, please set as follows:

(3) The relative position of graphics must be set correctly, it is best to set the same position with the machine zero, such as machine zero is the upper right corner:

(4) Positioning mode in the panel generally select the button positioning. Press the menu button on the panel, and then select the seventh "basic parameter settings" press the OK button, and then select the first one, the working mode configuration.

(5) In the normal main interface of the machine, press the OK key, move the cursor to the file name with the up and down keys (note that the file name is changed to a blue background to the file name), and then press the OK key.

Then, enter the file properties settings, view the size of the current processing file size

 
X size refers to the size of the overall processing graphics X direction, the same Y the same
Then observe the laser head stopped at a certain position, you can see the X Y coordinates

Estimated laser head from this position to the right side of the machine graphics enough for the length of the graphics, if enough, in the panel by the positioning key to complete the operation, the problem of super format to solve, and vice versa can only move the laser head near the origin of the direction, and then Press the navigation key.
When the laser head moved to the limit switch near the origin, panel coordinates show XY coordinates are 0, and then press the positioning key, if at this time or prompt graphics out of bounds, that the size of the graphics must have exceeded the size of the machine format, then the processing Graphics machine can not be processed. (Of course, you can also move the laser head to the farthest end of the limit switch from the origin, through the panel coordinates to identify the size of the machine format, provided that X, Y pulse equivalent to be correct)
If you can understand the position of the laser head with respect to the position of the figure, and always remember that the three points are consistent, you can flexibly and freely change the blue point in the software, that is, the panel displays the blue point of the figure and the I laser head.

(6) If the machine with automatic feeding, directly open the super-format cutting.

That machine positioning must be set at the origin of the machine in the same direction
(7) The general default is the automatic positioning off when the super-border, if opened here, the software automatically according to the size of the graphics, automatically find the location of the cut and will not prompt the graphic super-world

(8) When engraving graphics, the laser head must not be too close to the machine's side, the general should set aside 20mm distance.